 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Indoor Blower not working
I noticed no air was coming through my vents the other day but the condensing unit outside was on. The indoor blower in the inside unit isn't starting up. How can I check to see it is the run capacitor? If I check it and it isn't that what else could it be? Is there any fuse I can check or something. Right now the motor just makes a humming noise like it is trying to start. That is why I figured it may be the run capacitor.
|
||||
Check out some similar questions!
I have a goodman unit and the indoor fan doesn't stop running also the pump is not working wasn't sure if the two or related or not.
Indoor Blower Motor would not turn off in any mode. Furnace would heat would work fine and shut down "except" the indoor blower continued to run. I replaced the Stat with the same result. So I reinstalled old Stat. Replaced the Intel-Ignition Circuit board 50A65-475 with the White_Rodgers...
I have a Goodman PHK060-1 heat pump. Just recently I have been having a delay after the unit fires up. The outdoor blower starts, and the indoor blower starts anywhere from virtually instantly to five minutes later. Generally speaking, it *seems* like the longer since it has run (and possibly...
Hi, I am so new to this I'm in diapers, so please forgive my ignorance. I found out by reading other topics in this forum how to check if my a/c was working, and I did get it to come on (outside) by crossing Y and R. The blower (indoor) was working only in the ON position. I couldn't get to the...
Hi, My indoor blower quit working, first it made weird sounds during start few times and then quit. I have a Rheem Criterion furnace from 1992. The air handler and evaporator was replaced few years ago and other maintenance done. The run capacitor (Old one was a cylindrical 15MFD 370VAC...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
