Ask Experts Questions for FREE Help !
Ask
    woodio's Avatar
    woodio Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jul 10, 2012, 07:52 AM
    Removal of interior freezer panel Maytag MBF1958XES
    How do I remove this panel?
    The door comes off easily, but there are drawer slides and ice maker in way. Thanks
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #2

    Jul 10, 2012, 10:33 AM
    Quote Originally Posted by woodio View Post
    how do I remove this panel?
    The door comes off easily, but there are drawer slides and ice maker in way. thanks
    See diagram attached

    You will have to remove all the items to get to the back side of the freezer to work on the defrost heater and bi-metal thermostat.
    Attached Images
     
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Removal of the freezer panel (Maytag refrigerator) [ 2 Answers ]

I have a Maytag refrigerator MTB1504ARW. Could anyone be so kind to explain me how I can remove the sheet metal panel inside of the freezer section to check the coils for ice buildup? I have tried this but the panel doesn't come off easily so I am worried not to brake something. Cheers!

2006 ford explorer interior door panel removal [ 1 Answers ]

Does anyone have instructions on how to remove the interior door panel on a 2006 ford explorer?

No screws, removal of freezer panel, ge fridge? [ 0 Answers ]

1995 Lexus E350 interior door panel removal [ 0 Answers ]

My 1995 Lexus E350 has a loose rear window. Step number one in solving my window problem is to remove the rear inside door panel. I've removed the most obvious screws and clips but I can't determine how to remove the panel in the area around the door lock and lever opener. Can anybody help me?

Interior 4 panel doors separating at panel joint [ 1 Answers ]

I had my entire interior house repainted last fall. All the doors, which are wood 4 panel very good quality are all separating where the sunken panel meets the wood around the door. Not sure I am explaining this correctly but I hope someone gets the picture... The doors have been in this house...

View more questions Search