Ask Experts Questions for FREE Help !
Ask
    jamyers's Avatar
    jamyers Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jul 10, 2012, 03:58 AM
    Well pipe height
    Is there a recommended height that my well pipe should extend above ground? I'd like to have it be less obvious, but want to make sure it is not too short.
    Thanks
    hkstroud's Avatar
    hkstroud Posts: 11,929, Reputation: 899
    Home Improvement & Construction Expert
    		  
    #2

    Jul 10, 2012, 05:52 AM
    Is this a pitless adapter?
    speedball1's Avatar
    speedball1 Posts: 29,301, Reputation: 1939
    Eternal Plumber
    		  
    #3

    Jul 10, 2012, 09:30 AM
    Is there a recommended height that my well pipe should extend above ground?
    Not in my area. We have well heads at ground level and some a few inches under ground. Regards, Tom
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

What is the height for the vanity drain pipe from the floor? [ 6 Answers ]

What is the rough height for the vanity drain pipe from the floor? I searched online and I found different ranges, from 14 to 20 inches and 16 to 24 inches. I tried copying the drain pipe height which was 20 inches, but my install came out to be 21.5 inches. Is 21.5 inches OK ? Or should I redo it...

Increase height of flange pipe [ 1 Answers ]

I have to increase the floor level of my bathroom by 1 3/4 inches. I intend to put 1 inch plywood and 1/2 inch for the cement backer board. The tile is approximately 1/4 of an inch. The bathroom floor will then be the same height as the hallway. However, this means that I have to increase the...

Stove pipe height [ 0 Answers ]

I have a Vermont casting top vent wood stove. My question is, can I put a elbow on directly to the top of the stove or do I have to come straight up with the pipe, and then use an elbow. What would the minimum length be of the straight pipe be, before using the elbow. Thanks, mark

Reducing height of Kitchen vent pipe [ 3 Answers ]

I just had new countertops installed and want to add a soap dispenser. However the existing vent pipe (black pipe) under the sink is too tall. Is there any reason I can not reduce the size of the vent pipe to allow for a soap bottle to be placed under the sink? It looks to be about 3" in dia. ...

Height of drain pipe for washer [ 2 Answers ]

Sorry, but I think this may be a totally rookie question. Instead of having our washing machine discharge into a sanitary tub I added a T to the drain and made a dedicated drain for the washer. The height of the pipe was only about half of the height of the washer itself. Now, when the washer tries...

View more questions Search