 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Moen 3330 Valve
I would like to use the Moen 3330 valve for a typical tub / shower using the diverter on the tub filler spout to divert water to the shower head. I would to use the diverter on the 3330 valve to divert water to a separate hand held shower. Will this valve work in this application and how do I connect the piping?
|
||||
|
||||
|
I don't see how diverting the flow at the spout would give you pressure at the shower head. However, since the hand held shower head is in the closed position and won't flow until used why not tee off the shower raiser? You can install a inline stop on the shower arm. (see image) to close the shower head when using the hand held. This could also be done with a less expensive shower valve using a diverter spout. And your thoughts? Good luck, Tom
|
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
Can't get the clip to go in. Help please.
Need extractor for moen diverter valve installed for tub/shower application. Valves include hot water -- diverter valve -- cold water aligned left to right. Diverter handle will not turn and can not remove valve even after several days of soaking with vinegar. Moen part number for the valve is...
Can I use a Moen rough-in valve with a kohler shower trim kit? My contractor used Moen valves but I really want a Kohler trim kit.
The temperature of the water changes drastically while showering. Moving the handle to a different position does not keep the water at a constant temperature. Does this mean the mixing valve is shot and does moen warrant this part?
I have no hot water coming out of my shower valve but the sink next to it is red hot. Can you please help my wife is going to kill me She needs hot water Thanks armand
View more questions Search
|
