Ask Experts Questions for FREE Help !
Ask
    Demler's Avatar
    Demler Posts: 3, Reputation: 1
    New Member
    		  
    #1

    Jul 6, 2012, 07:17 PM
    Moen tub/shower valve
    The cover plate says moen, the screws are at 5 and 7, single pull knob, moen wizard says they do not have valve. This is for tub/shower
    massplumber2008's Avatar
    massplumber2008 Posts: 12,832, Reputation: 1212
    Senior Plumbing Expert
    		  
    #2

    Jul 7, 2012, 02:58 PM
    Hi Demler.

    Exactly what is your issue? What is the problem with the valve? Moen has replacement parts readily available so let's see if we can figure this out, OK?

    Mark
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
    		  
    #3

    Jul 7, 2012, 05:17 PM
    I am in the same boat with Mark but am also wondering what a Moen wizard is.
    Demler's Avatar
    Demler Posts: 3, Reputation: 1
    New Member
    		  
    #4

    Jul 8, 2012, 06:33 AM
    The valve is leaking severely. More on cold side than hot. Tried to pull valve but stuck and wanted to have replacement valve on hand before going further. I could not determine what valve I have so I sent pics to moen to identify
    Demler's Avatar
    Demler Posts: 3, Reputation: 1
    New Member
    		  
    #5

    Jul 8, 2012, 06:35 AM
    Moen wizard is a tool from moen to help I'd what valve is depending on answers given to their questions. Did not help
    hkstroud's Avatar
    hkstroud Posts: 11,929, Reputation: 899
    Home Improvement & Construction Expert
    		  
    #6

    Jul 8, 2012, 07:05 AM
    I tried the Moen wizard and go same results, "No replacement cartridge Available". Apparently Moen wizard does not work.
    The replacement cartridge, based on your description should be either 1225 or 1200.

    Best to just phone Moen or pull existing cartridge and see.
    Attached Images
      
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

No hot water (at all) -- Moen Brantford Posi-Temp Single-Handle Tub/Shower Valve [ 6 Answers ]

There is no hot water. Period. When I turn on the faucet there is only cold water. If I turn the handle all the way counter-clockwise, the water flow stops completely -- not even cold water. There is hot water in every other sink/shower in the house (including the sink in the same bathroom). This...

My single lever tub shower moen valve will only give all cold or all hot water no w [ 1 Answers ]

My single lever tub shower moen valve will only give all cold or all hot water no water comes out when the valve is in the middle position. Any help.

What shower/tub trim set will work for Moen valve cartridge # 109272? [ 3 Answers ]

I saw John's answer to Art's question. But my question is the other way around. Art tried to find a replacement valve cartridge for Moen # 109272. My valve cartridge is working, but missing shower trim, single handle and tub diverter. I am trying to find a Moen shower/tub trim set would work...

Positioning Moen Shower/Tub Mixer Valve [ 12 Answers ]

Hi all, I am installing a Moen L82839 one handle tub/shower valve and I'm wondering about changing the valve position from the position in the instructions. The instructions have the showerhead 78" above the bottom of the bath, the valve 32" above the bottom of the bath and the faucet 6" -...

Moen tub/shower valve installation [ 3 Answers ]

We just had a contractor install a Moen valve in our bathroom remodel. It is a M-Pact common valve system and the model number is T2449pm. When I fill the bathtub with the bathtub spout water is dripping from the shower head. What are the possible reasons for this. I had one plumber come out...

View more questions Search