Ask Experts Questions for FREE Help !
Ask
    skipper922's Avatar
    skipper922 Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Jul 2, 2012, 06:23 AM
    How tro full a blatter tank
    Water pressure is 20 psi and will go to o when water is turn on anywere in the house blatter tank has o pressure in it what can I do
    skipper922's Avatar
    skipper922 Posts: 2, Reputation: 1
    New Member
    		  
    #2

    Jul 2, 2012, 06:24 AM
    [QUOTE=skipper922;3177625]water pressure is 20 psi and will go to o when water is turn on anywere in the house blatter tank has o pressure in it what can I do
    jlisenbe's Avatar
    jlisenbe Posts: 5,020, Reputation: 157
    Uber Member
    		  
    #3

    Jul 2, 2012, 07:15 AM
    Need some more information.

    1. You turn on water and pressure goes to zero. Does the pump come on?
    2. Is 20# of pressure as high as your system goes?
    3. Has the system been working all right but recently developed this problem?
    speedball1's Avatar
    speedball1 Posts: 29,301, Reputation: 1939
    Eternal Plumber
    		  
    #4

    Jul 2, 2012, 08:22 AM
    Answer Jlisebesa questions and I have a few of my own. What is the cut in/cut out point on your control box? How old is your house and what material are the water pipes? Copper. Plastic or galvanized? Back to you, Tom
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

How can we tell if our septic tank is full? [ 5 Answers ]

We noticed this morning that any time water is run from any place in our house, yucky brown water comes up through the drain and into the bathtub in our downstairs bathroom. There is also water on the bathroom floor.. I'm not sure if that is coming from around the toilet or where. Does this mean...

Toilet tank not full [ 7 Answers ]

The water level in the toilet tank is 2 inches below the line.. it takes 1 min 20 seconds to fill. What is the problem

Well pump cutting out before tank is full [ 5 Answers ]

When water pressure reaches the cut in pressure of about 35 psi (gauge on tank) the pump kicks on, and raises pressure to about 50 psi, it then hammers to a stop. After about 15 seconds, it turns back on and raises the pressure to about 57 psi, and hammers to a stop again. After another 15...

Toilet has no water. Tank is full. [ 3 Answers ]

Hi ! We have a second home. After not being there for several weeks we noticed that the upstairs toilet had no water in it. The tank is full but the toilet is empty. What could be the cause of this? Is something clogged? Thanks Mimi

Well blatter tank pressure [ 2 Answers ]

When adjusting cut in and cut out pressure on well pump what do I need to set pressure of blatter tank to?

View more questions Search