Ask Experts Questions for FREE Help !
Ask
    franclancy's Avatar
    franclancy Posts: 1, Reputation: 1
    New Member
    		  
    #1

    May 21, 2012, 05:36 PM
    Troubleshooting problems with deck on troy bilt
    When I lower the deck it chops up the grass right down to the dirt. Checked to make sure the belt wasn't broken and it seems to be fine. Not sure what to look for next
    crigby's Avatar
    crigby Posts: 4,343, Reputation: 107
    Outdoor Power Equipment Expert
    		  
    #2

    Jun 30, 2012, 08:32 PM
    Hi,
    How low are you dropping it? Is it the same setting you have used in the past? Have you had the deck out?
    Peace,
    Clarke
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Troy bilt lawn mower troubleshooting [ 3 Answers ]

I havae a 2007 Troy Bilt Super Bronc with which I have many reoccuring problems. The latest and most reoccuring is the cable that engages the blades. I just replaced it again and now the blades won't turn. What is the fix?

Troy bilt riding mower troubleshooting [ 1 Answers ]

I have a troy bilt 42" pony riding mower, it is 8 years old, no previous work or trouble. Lately, after mowing for about 30 minutes, the motor stalls. Turn the key, and it starts right up, and runs fine for a few minutes, then stalls again. I changed the spark plug and put in fresh gas. No...

Troy bilt troubleshooting? [ 2 Answers ]

I hit some unlevel ground and bottomed out the lawn mower. The mower will not even attempt to start now. Any suggestions?

Troy bilt lawn tractor mower deck problems [ 1 Answers ]

I have a troy lawn tractor 18 horse 42 inch cut. I have replaced the belt on the deck several times always buying the same belt. The last two times I replaced the belt , the belt seems to be to long for the deck. It is loose and does not tighten up right when the deck is ingaged causeing the blades...

View more questions Search