Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Hunter thermostat not reaching set temperature
[ 2 Answers ]
My hunter thermostat model 47110A is set to 20 degrees celsius but the furnace will not stay on long enough for the temperature to rise to the set degree. It is currently holding at 16 degrees instead. The batteries are brand new but still the temperature will not rise. This is my first home so...
My draft inducer shuts off and on several times before reaching temperature
[ 0 Answers ]
, which also causes the burner to go off and on too. The blower motor stays on the whole time.
Heater Shuts off Before Reaching Set Temperature
[ 5 Answers ]
I have a goodman a/c with electric heat strip (10kw) and vey recently it stated to turn off before reaching the set temperature. After a few minutes it will restart and run for a couple of minutes and then shut down again without reaching the setpoint. It always stops at 66 on the white rogers...
Temperature increases even after reaching programmed temperature
[ 3 Answers ]
I have a NOMA thermostat (model 52-2558-8). After reaching the programmed temperature, the furnace stays on without shutting down (8 degrees before I manually shut it off). Is this a thermostat issue or a furnace problem?
Furnace not reaching set temperature
[ 1 Answers ]
Similar problem Chickendoc has. The pemperature lebel shown in the thermostat is 67 while the setting is 72 when it stops. The furnace run short period of times. Some times it re-starts a few times stopping/re-starting succesively at same period of times. Finally, it gives up. What we are doing is... View more questions Search
|