Ask Experts Questions for FREE Help !
Ask
    victory01's Avatar
    victory01 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jun 20, 2012, 06:56 AM
    How do you replace the trans pulley on a jd lt160?
    The spines are stripped on this pulley and I was wanting to know if there are more than one way to replace this pulley?
    crigby's Avatar
    crigby Posts: 4,343, Reputation: 107
    Outdoor Power Equipment Expert
    		  
    #2

    Jul 12, 2012, 06:54 PM
    Hi,
    It is difficult to do with the transaxle in the machine unless the fender deck is removed. Both are time-consuming. The pulley is #MIU800221 held bu a spacer and snap ring.
    Peace,
    Clarke
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Removing pulley from 18 hp b&s motor to replace? [ 1 Answers ]

How to replace tensioner pulley on my B1500 Ram van [ 1 Answers ]

I don't usually work on this engine in my 2000 Ram van (conversion) with 3.9L V6. But I should be able to handle changing the tensioner pulley, which is starting to whine. The engine compartment is cramped. Can I do this by just slipping off the serpentine belt? Or do I have to remove other...

John Deere LT160 [ 0 Answers ]

Tractors starts and idels fine. When I engage the blades it runs uneven and sounds like it wants to stall. The blades are not at 90 degees and turn freely. Any advice greatly appreciated.

Need to replace the small pulley of the blower for Carrier Weathermaker 58CHB070-1 [ 0 Answers ]

I called one of the Carrier dealer (Sears Canada Inc) but they could not find this model. Could someone help us to find the part for replacement? The furnace is about 30 years old, but still works. So we don't want to change it yet. Sincerely, Olga

94 honda civic pulley bolt is welded now pulley is knocking against timing cover [ 1 Answers ]

What do I do? Its wobbly and I can't remove the bolt because it has been spot welded I need my car I'm a singly mom w/disabled child

View more questions Search