 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
Check out some similar questions!
Because of leaking, I ordered a replacement valve and rings from Kohler in order to rebuild my faucet (Forte, one handled). I got the oval piece off, used an Allen wrench to loosen the handle's set screw and removed the handle, then unscrewed the bonnet, unscrewed the retaining ring on the valve...
I need to know how to tighten my Kohler forte faucet from underneath. It is loose at the base where it connects to the granite countertop. What is " the slender tool like a long socket" called?( someone else described that for Kohler instead of a basin wrench, but that doesn't help me find the...
Hello, I have a replacement cartridge for my Antique K-169 faucet but I cannot figure out how to get the old cartridge out. The Kohler instructions talk about removing the "bonnet", but I can't figure out which part the "bonnet" is or how to remove it. I have tried turning it counterclockwise,...
I've changed out the single control Kohler cartridge, however, the mixer at the bottom now leaks only while the water is on. What am I doing wrong?
I would like to purchase 2 Kohler Forte Multifunction shower heads to replace my current shower heads which are Price Phister. I read and was also told that this model from Kohler is good for use in areas with hard water. I've had one recommendation to purchase the shower arms as well for this...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
