 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
When replacing a Body control module in a 1996 Explorer
I have a replacement from a salvage yard, but have heard that I need to have the dealer program the replacement unit. Is that necessary? It supposedly came from a like equipped explorer, can I try it as is without hurting anything?
|
||||
Check out some similar questions!
Replacing ignition control module 92 accord LX
[ 4 Answers ]
Hi Everyone, I am trying to replace the ICM but I'm stuck. Cap's off, shield's off, rotor's off tried to remove screws holding plate which is blocking the screws holding the ICM. Is it better for me to just remove the whole distributor? Afraid of destroying the screw heads. Also there is also...
Replacing engine control module on honda civic?
[ 0 Answers ]
How do I get the teeth off the distributor so tha I can get the old one off
Replacing intermittent pilot control module
[ 1 Answers ]
I have a 22 old Janitrol (goodman) furnace and my furnace guy, besides trying to sell me a new furnace, says the intermittent pilot control module need replaced as it sounds like it's not working properly (bouncing relay). My problem is he wants to charge an arm an a leg to replace it and I found...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
