Ask Experts Questions for FREE Help !
Ask
    shawn34's Avatar
    shawn34 Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Feb 20, 2011, 02:24 PM
    Replacing engine control module on honda civic?
    How do I get the teeth off the distributor so tha I can get the old one off

Check out some similar questions!

Symptoms of ignition control module failure honda civic [ 24 Answers ]

Hi. My 1990 Honda Civic DX, A/T, 149K miles starts fine and seems to be idling fine. Problem is after about 10 minutes of driving the engine will stall as I'm driving down the road. The CEL does come on, and I coast to a stop. It will then start after about 5/15 minutes later and run fine....

Replacing ignition control module 92 accord LX [ 4 Answers ]

Hi Everyone, I am trying to replace the ICM but I'm stuck. Cap's off, shield's off, rotor's off tried to remove screws holding plate which is blocking the screws holding the ICM. Is it better for me to just remove the whole distributor? Afraid of destroying the screw heads. Also there is also...

Replacing intermittent pilot control module [ 1 Answers ]

I have a 22 old Janitrol (goodman) furnace and my furnace guy, besides trying to sell me a new furnace, says the intermittent pilot control module need replaced as it sounds like it's not working properly (bouncing relay). My problem is he wants to charge an arm an a leg to replace it and I found...

View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.