 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
Check out some similar questions!
Model #9013FSG2J21BP
I have a pump with the switch pumptrol/square D 9013FSQ2... the water inside has been sputtering for about a week and last weekend, I came home to no water. I opened up the top of the switch and it was full of cobwebs so I cleaned it, turned the switched back on and bled the line and it worked...
Hi all: My daughter asked me to wire power to her deep water well... I will be using #12 2 wire w/ ground through a 20 amp circuit breaker to a 20-40# pumptrol pressure control switch... The pumptrol has four terminals in a line, the two end terminals are marked "L" and the two center terminals are...
I have a fsg2 square d well pump switch. If I want to get the max pressure, can I do it by adjusting one of the screws only? Charles
Hi. I am using well water for my residence. Lately I start having pressure problem. The pressure switch is not activating when the water is flowing and the pressure goes down to 20 psi then drops to zero. After awhile the switch activates and build up the pressure to 100 psi. The switch is set for...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
