Ask Experts Questions for FREE Help !
Ask
    peckedby2's Avatar
    peckedby2 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    May 26, 2012, 04:15 PM
    No sound from my av receiver
    I have a pioneer av receiver. I recently had to reset it to fix my channel guide and now I get no sound when I try to watch the TV. When I put a movie in the dvd player my surround sound works just fine.

Check out some similar questions!

Hooking up surround sound to HDTV & cable box with one hdmi on receiver [ 1 Answers ]

Trying to hook up my comcast hd cable box , my vizio hdtv and my panasonic sound system using hdmi cables. The sound system has only 1 hdmi connection out. Does this mean I have to use an optical cable somewhere and if so from the cable box to the receiver and then the HDMI from the receiver to the...

AV receiver connect to HDTV, but no sound? [ 1 Answers ]

I have an AV receiver connected to an HDTV with red and white cables(audio in to audio out). The provider cable is connected to the HDTV, and I have a blu-ray connected to the HDTV with an hdmi cable. The blu-ray works, but I cannot get sound of the speakers connected to the receiver. Any help...

Hearing sound from Pioneer VSX519V receiver from Panasonic TCP50X1 [ 3 Answers ]

I have everything hooked up including 4 speakers-2 front connected to the front speaker connections on the receiver and 2 rear connected to the surround connections. I have no center speaker. What settings do I use on the receiver and the TV to listen to TV through the receiver and right now I...

Connecting a DVD/VCR Combo to TV and surround sound receiver [ 2 Answers ]

I have a Toshiba 42' HDTV and a Toshiba DVD/VCR Combo. Both have HDMI connections. My Pioneer Dolby receiver is an older model with no HDMI connection. I am on "DISH" network using a satellite as my source for the TV signal. Can you tell me what cables I need and the proper way to connect it...

Onkyo receiver setup, no sound [ 1 Answers ]

Recently purchased Onkyo Tx SR 605 it to my older Digital Phase AP! Speakers (8 ohms per manufacturer) I am getting NO sound whatsoever out of speakers , tried twice with Onkyo customer service but ultimately they reported but speakers/wires are defective. If those were defective wouldn't I at...

View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.