Ask Experts Questions for FREE Help !
Ask
    amit00025's Avatar
    amit00025 Posts: 1, Reputation: 1
    New Member
     
    #1

    May 25, 2012, 03:22 AM
    Trip setting of Vacuum circuit breaker?
    I have a ABB Vacuum circuit breaker RMU IEC 60298, so its trip when load exceeds to set limit. Then I don't know how to set the trip setting of VCB or how to increase of load current setting of VCB?
    ]
    Amit
    tkrussell's Avatar
    tkrussell Posts: 9,659, Reputation: 725
    Uber Member
     
    #2

    May 25, 2012, 05:13 AM
    You will need to have a Short Circuit Corrdination Study performed by a qualified engineer for the system and/or circuit.

    Once this is done, the report will list the settings for this and any other distribution breakers.

    Any other method would be a guess, and if not guessed correctly, can be a serious hazard to the equipment, load, and personnel involved.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Theory of vacuum Circuit Breaker & sf6 circuit breaker [ 15 Answers ]

I want to know about the basic Theory of vacuum Circuit Breaker & sf6 circuit breaker

Vacuum circuit breaker [ 6 Answers ]

Good day, We have a vacuum circuit breaker (1200A, 15KV, manufactured by Siemens) which feedd power to 13750HP motor. We had three similar incidents on the same 13.8KV substation on these breakers since it was commissioned on 1994. The last incident occurred on Feb. 1st, 2010 when a technician was...

How vacuum is maintained in a vacuum circuit breaker [ 0 Answers ]

In industries we use vacuum circuit breaker to disconnect supply in a faulty condition. But how vacuum is maintained for a long term use of circuit breaker?

Circuit breaker trip after install of GFCI breaker [ 3 Answers ]

I'm replacing an outlet under kitchen sink that garbage disposer and dish washer were plugged into because they stopped working. The old outlet was not GFCI. So I'm attempting to replace it with one. Our home was built in the '50s and has no ground line yet. I used an extension cord to plug them...

What is mean by Vacuum Circuit Breaker [ 1 Answers ]

I want to know complete detail of Vacuum Circuit Breaker.


View more questions Search