My old murrey rider will start and engage blades but won

Andrew Bergstro Posts: 1, Reputation: 1

New Member

May 22, 2012, 08:26 AM

My old murrey rider will start and engage blades but won

My old murrey rider will start and engage blades but won't run but thirty seconds then die but will start and do same again

Check out some similar questions!

Craftsman 50" Rider Stalls When Blades Engage [ 1 Answers ]

Mower has a 20 hp Kohler motor, is 13 years old, and very well maintained. New deck assembly this year. Teenage son runs mower out of gas. He puts gas in but it won't start. I assumed it may have sucked up some trash when it ran out of gas. I got it running again by changing the fuel filter,...

Blades will not engage [ 2 Answers ]

We have a 2003 Craftsman riding mower. The mower will start but you cannot engage the gears. Any help?

Lawn mower won't start , changed Plug , but Still won't Start [ 2 Answers ]

My lawn mower won't Start , I tried Changing the Plug , But still won't Start

92 camry won't engage the starter [ 1 Answers ]

My 92 camry when trying to start only dims the radio and clock. The starter was removed and with it disconnected still dimmed the radio and clock. I had the starter checked out and its perfect. I also changed the battery and positive battery terminal. I tryied also to start it in neutral, no luck....

Blades won't engage [ 1 Answers ]

I have a Rally, made for Craftsman, model 18544B, 18.5 HP Briggs, 42 inch cut. I am told it was made byAYP. Blades have stopped engaging. I have replaced the PTO switch. Following the wires some lead to a plug in into the mower that is in the base of the frame on the right side, just above the...

View more questions Search

Check out some similar questions!

Add your answer here.