Ask Experts Questions for FREE Help !
Ask
    princesszoo's Avatar
    princesszoo Posts: 1, Reputation: 1
    New Member
    		  
    #1

    May 6, 2012, 06:26 AM
    Circular Drum Light in Bathroom - help needed to remove the cover
    Hi

    I have a circular drum light in my bathroom and I cannot get the shade/diffuser/cover off it so that I can change the bulb as its gone out.

    There is only one small notch type thing which I can see but not sure how to get it off I've tried sticking something in it to force it off but nothing works, the shade things does spin round so I've tried to do that and see if it will un screw but nothing :(

    Help xx
    Stratmando's Avatar
    Stratmando Posts: 11,188, Reputation: 508
    Uber Member
    		  
    #2

    May 6, 2012, 06:44 AM
    That may be a release to allow it to turn.
    If no screws are visible and it doesn't turn. It may just pull off being held by spring clips.
    Some rectangular lights have to be lifted on one side to remove.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Harbor Breeze Avian fan -- how do you remove light cover? [ 2 Answers ]

Harbor Breeze Avian Ceiling fan.. how do you remove the light cover? We can't see any screws, clips, etc. The lens doesn't rotate, and it doesn't seem to 'pop off' when gentle pressure is applied. We need to replace the bulb, so how do you get the darn thing OFF?

Bathroom fan/light stopped working, but main light in bathroom still works... [ 2 Answers ]

Hello all. I have gone through and read other questions like mine, but they all seem to have separate switches for the lights and the fan. Howerver, my bathroom only has a single switch that controls the valinity light on top of our sink, and the bathroom fan/light combo in our ceiling. Here's...

Clothes dryer drum hits the inside of the cover as it spins [ 0 Answers ]

After months of putting heavy things on top of my dryer, it's cover has sunk in enough to cause the drum to rub against the inside of the cover, making a loud metal on metal noise. Can I take the cover off and push the metal back out where it belongs? Is there another way to strengthen the cover?...

On Trane XE 60, how to remove front cover and start pilot light? [ 1 Answers ]

This is a Trane XE 60 unit, model TUP080B936A with a standing pilot. Our heat did no go on this morning. I turned the circuit breaker off. 1. How do I remove the front panel? 2. Will the location of the pilot light be obvious? 3. Should the pilot light still be on or would it have been...

What is needed to remove the smell of sewer gas out of a residential bathroom [ 7 Answers ]

Thanks for your help. The smell has been a difficult one to remove from our bathroom. I'm not sure what else to do, I've tried pouring bleach in the drains and also just straight hot water.

View more questions Search