 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Sounds like some mineral build up in the pipe walls broke loose and is now clogging the inlets of your fixtures. Let's take the lavatory first, Shut the water off under the cabinet, open up the faucet and remove the cartridge. Check and clear the inlet ports. Now place a pan over the faucet and turn the water back on for a moment to flush out the supplies. (You should have a strong stream ). Reassemble and test.
I need to know which ballcock is yours.(see image) Back to you. Tom |
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
All other water sources in the condo are fine, any suggestions? Thank you
I just installed a new sink in my bathroom and the water pressure was fine and there was no sign of a problem. However maybe two or 3 days later, there was a lack of water pressure of more 50% from both hot and cold water. The toilet is fine and so is the shower and kitchen sink. It's a new sink,...
When I flush the toilet, take showers in my upstairs bathroom, water comes out of my downstairs shower. How can I fix this problem without calling a professional plumber?
THe water pressure coming out of our sink has decreased. Anyone know what may cause this?
I am in the process of updating my bathroom, and am having some problems with the sink. I installed a Pedestal type sink which was my first mistake. But the problem Im having is with the pipes (which come up from the floor). I installed cutoff valves above the floor, which take in from the...
View more questions Search
|
