 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Heating and air questions
Tempstar Central air. Outside unit the fan will not engage but if just nudged will take off. Sounds as if unit tries to cycle while fan is running but does not. After a few minutes fan shuts off. No issue with unit at all. Then this issue. Any advice? It is an electric unit
|
||||
|
||||
|
This can turn out to be a really cheap and easy fix. When a run capacitor on a motor is bad it gives the same symptom you just described. It's a cheap part and it can be found at any hvac supplier or company. Our company will test it for free if you bring it to us in hopes you buy the part from us. I'm sure one in your area would do the same.
|
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
Why is there ice on my air conditioner lines?
It is a gas pack. Blowing air but not heating. Could it have a pilot light out?
Hello, I have central air/heat unit at my home and have been having an odor (smokey, fish odor) emitting from the vents. It is only in the downstairs vents because we have two separate units and zones. I indpected the inside of the furnace and it was clean, no water or tears in the ducting for...
My American Standard electric furnace runs only when the thermostat is on the "on" position and not when on the "auto" position. So basically it's running manually. I replaced the thermostat thinking it was the problem but that did not help. Now the AC works fine on "auto." Can you help me?
Hello, Heat is not working, help I need advice, this what I have discovered. Thermostat = Auto, Heat; I hear a small blower fire up below the house and it runs for about 2-3 min. and then nothing happens. Thermostat = On, Heat; Same as above. Thermostat = On, neither Heat or Cool is...
View more questions Search
|
