[tableclocks]

I like to paint some stripes on my truck... I know to clean and sand... ect... when I do the sanding... do I have to take off all the clear coat from the oringal color... or just a good wet sand to make sure its clean... thanks... richard

[cdad]

I like to paint some stripes on my truck...i know to clean n sand ...ect....when i do the sanding....do i have to take off all the clear coat from the oringal color...or just a good wet sand to make sure its clean........thanks....richard

What type of stripes are you thinking about? Pinstripes or the wide style that are usually a few inches wide?

[tableclocks]

Progressive blocks down the sides n around the hood across the hood about 8 in wide from side to side solid across... dowm the side... blocks... about 4 in wide.. ship 4 in... ect

[tableclocks]

Red 07 chevy with black striping... ect... thanks... richard

[cdad]

With big blocks like that I would sand down the clearcoat and polish the undercoat before painting. Then paint and after that is dry clearcoat again in gloss.

[tableclocks]

OK tks... you like enamal or laquar... spray cans ?
Spray cans... I may not need a clear coat? Thanks... richard