Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
I have a 1993 model 1325 with a kohler engine cub cadet.
[ 0 Answers ]
I got it used runs great I love it but it has 3 belts and the pto belt broke I don't know how to replace it properly the manuals I have for it only show how to replace the deck belt.we put the knew belt on and it runs but won't go into reverse unless I turn it off and I here a click towards the...
Cub cadet 2166 kohler 16 hp engine idles, but dies when you throttle up
[ 3 Answers ]
I have a 2000 cub cadet 2166 with a kohler 16 hp engine - it starts, idles fine, but when I throttle up past 1/2 throttle it chokes out and dies. Any ideas?
14hp kohler cub cadet
[ 3 Answers ]
I have a problem with the points keep getting pitted up and I have a no spark clean them and it runs.. my question is if I convert it to electronic ign. Will that take care of the problem? Or is there a different problem I am not thinking of? Thanks for the help
Kohler 23 HP Cub Cadet Dies at 1 minute
[ 2 Answers ]
My GT3100 Cub cadet starts up just fine, but after about 1 minute, it dies like the safety switch has engaged. It has a kohler 23 HP engine. I checked the only know safety switches I have (seat, etc) and they seem to be OK. It will start right back up, run for 30 seconds, and die again. I am...
Cub Cadet GT3100 Kohler 23 Dies after starting
[ 1 Answers ]
My GT3100 Cub cadet starts up just fine, but after about 1 minute, it dies like the safety switch has engaged. It has a kohler 23 HP engine. I checked the only know safety switches I have (seat, etc) and they seem to be OK. It will start right back up, run for 30 seconds, and die again. I am... View more questions Search
|