Ask Experts Questions for FREE Help !
Ask
    Tonrac1's Avatar
    Tonrac1 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Apr 28, 2012, 02:45 PM
    I have a 2007 Scotts/John Deere 42"
    I need the blade drive belt # and an installation diagram for the two blade model and or access to the deck parts breadown. Appears the same or similar to the JD units of similar size but don't know for sure. Thanks

Check out some similar questions!

Scotts, Kohler Command 17.5 by John Deere won't stay running [ 2 Answers ]

I have a Scotts Kohler Command 17.5 riding mower, made by John Deere, that always starts but recently it will not keep running. Yesterday I sprayed some carburator cleaner in the bowl and it ran for about 10 minutes, then it began to stall and wouldn't continue to run. It seems like it is starving...

What is the problem with my scotts john deere 1642h [ 1 Answers ]

When I release the brake pedal the engine turns off.

Can I hookup 2 Scotts mower made by john deere [ 1 Answers ]

Can I hook up oil preasure gauge to this 17 hp intek briggs motot on my scotts riding mower it was made by joghn deere model s1742

Scotts (John Deere) with Kohler engine won't start! [ 1 Answers ]

Scotts (John Deere) riding mower with Kohler engine won't start!! Jump starting = no help. Made sure seat safety switch clean and ignition fuse OK. Brake on. Parking brake on/off. Disengaged and re-engaged tranny. Made sure blade handle full up and a little more and a little less just in case...

View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.