Ask Experts Questions for FREE Help !
Ask
    Johnsapp14's Avatar
    Johnsapp14 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Apr 24, 2012, 06:03 AM
    Heating & air conditioning
    Need to find a replacement for The draft inducer on my American Standard freedom 80
    ma0641's Avatar
    ma0641 Posts: 15,675, Reputation: 1012
    Uber Member
    		  
    #2

    Apr 24, 2012, 09:21 PM
    But not an American Standard? Otherwise go to an HVAC supply house.
    drtom4444's Avatar
    drtom4444 Posts: 3,282, Reputation: 145
    Ultra Member
    		  
    #3

    Apr 25, 2012, 09:10 AM
    That motor can be replaced by any generic motor with the same shaft size, RPMs, HP, rotation, and voltage. Any HVAC supply house should have it. Try to get one with ball bearings, but if one is not available make sure to oil the motor before you install it with high-speed turbine oil available for $2.00 at the HVAC store; it has a plastic spout that extends to get into the oiler holes on motors. You should oil all of your motors each year to keep them running.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

My ruud Heating & Air Conditioning is not blowing hot air [ 1 Answers ]

My ruud Heating & Air Conditioning system is not blowing hot air, everything is working fine but not blowing hot air when I put it to heat

Heating& Air Conditioning [ 1 Answers ]

I bought a Honeywell programmable thermostat RTH230B can I use it with gas heat only system?

Heating & Air Conditioning [ 1 Answers ]

I have a gas furnace with a washable filter. But dust is building up in the vents into rooms and inside the intake air duct. Should I install a filter to stop dust buildup in the intake vent?

Heating & Air Conditioning [ 3 Answers ]

There was a question I neglected to ask in my previous note. How do I fix a situation involving a radiator. Whenever the boiler turns on and it begins to heat the system, there is a radiator that makes a loud noise as if someone is banging it with a metal object. How do I fix that? Thanks again for...

View more questions Search