 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Hampton Bay ceiling fan lights quit working
My hampton bay ceiling fan light fixture quit working. A week ago, one light went out, although now all three are out. All three bulbs were replaced. The ceiling fan does work, but the light does not turn on. There is electricity going to the fan any suggestions? I have only had the ceiling fan a little more than one year.
|
||||
Check out some similar questions!
I heard a pop and one light bulb burned out of our Hampton Bay, we replaced it but now the 3 lights just stay on dim. Could it possibly be a potentiometer? Or a burned wire. I assume if it is a burned wire the bulbs would not be lit at all. Thanks, Timmy
The lights on the Hampton Bay I have in my office at home stopped working (I use a remote and there are no pull chains) When I press the button for the lights, the light on the remote does not come on, nor do the four 60 watt lights on the fan (the fan function works fine, and the little light on...
I just purchased a hampton bay carriage house II ceiling fan. As I installed each section, I checked and rechecked wires and fitament being careful not damage anything. When I turned on the fan, only 2 lights worked (opposite sides of each other). I removed the bulbs of the non working and replaced...
My HBCF stopped working recently. It does not have pull chains but does have a remote. I put a new battery in the remote. The switch on the wall is good. The fan has worked in the past. Someone mentioned adjusting the toggle switches on the remote. Where would I find the ones on the fan that...
Model - Portland -52 inch I installed the ceiling fan and lights The fan works perfectly the lights do not come on Now what?
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
