Sears guardian for AC over tstat was removed now AC does not kick in

jgans99 Posts: 1, Reputation: 1

New Member

Apr 23, 2012, 08:12 AM

Sears guardian for AC over tstat was removed now AC does not kick in

I removed an old 70s' sears guardian unit that doesn't work located over tstat . Since I cut the wires the AC does not kick in.

Check out some similar questions!

Removed Firefox was going crazy was told the guru could fix for$99.99so just removed [ 1 Answers ]

I've done defrag dic cheks virus scans and called the Firefox guru where was scaned and asked for 99.99 to fix prob it kept crashing and blinking in and out but wouldn't start up

Wiring from old ruum tstat to hunter tstat [ 7 Answers ]

https://www.askmehelpdesk.com/attachment.php?attachmentid=20991&stc=1&d=1245520740 https://www.askmehelpdesk.com/attachment.php?attachmentid=20992&stc=1&d=1245520740 First pic is my old tstat - I believe it is a heat pump. (note that orange wire and gray wires are not used, E and W2 are...

Replacing old Sears (70's) tstat, 3 light indicator System Guardian? What's that for? [ 5 Answers ]

I replaced a 4 wire Sears mercury thermostat with a new honeywell... No problem 4 wire to 4 wire. All works fine. The question I have involves the "system guardian" that is located just above the thermostat. It consists of 4 wires going to three indicator lights A/Auto Rest, B Manual Reset, C...

Switching from Rudd tstat to hunter tstat [ 1 Answers ]

I have a single stage heatpump. I changed the tstat out yesterday to a new hunter manual tstat, worked fine last night. Came home from work today and it was very hot in the house,only the fan was running. Now the outdoor unit will not come on at all. I am wondering if there was a mix up when wiring...

View more questions Search

Check out some similar questions!

Add your answer here.