Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Toilet tank doesn't refill. No water in tank make it flush
[ 17 Answers ]
My toilet was working properly before tonight. :p There was no slow leak sound; nothing. Now when the handle is pressed, nothing happens. I opened up the tank and found there was no water in the tank. :( I've been searching the Internet for answers, but haven't found any that address this...
Toilet tank leaking from tank bolt on left side only
[ 5 Answers ]
After installing the tank, it won't initially leak but the left side will start to leak. Don't see any cracks. What is the right sequence for using the washers and nuts to the bolt? Do I first put a metal washer, then a rubber washer through the bolt and then put it through the tank, and then...
Emptied tank and cleaned toilet. Now tank runs off and on
[ 3 Answers ]
Hi, I never had a problem and now after I cleaned my toilet and removed the water, I turned water valve back on and every time I turn a faucet on in another part of the house the darn toilet tank runs! PLease any ideas?
Toilet Flushing: tank drains, toilet doesn't flush, brand new toilet.
[ 4 Answers ]
I read the other postings, and most of the problems came in with old toilets. Mine is brand new (within a year old) and I just moved in to my new place. The condo has 2 identical toilets and the other flushes just fine. I have mimicked the settings of the working toilet and still can't get my...
Pressure from toilet valve will not fill toilet tank
[ 1 Answers ]
I have recently had a soft water installation put in. The shut off valve is conveniently close to the garage where the clean water tank was installed. Anyhow after the installation was completed pressure worked great in every room except the master bathroom toilet. The dual sink, the shower, and... View more questions Search
|