Ask Experts Questions for FREE Help !
Ask
    Sontfami's Avatar
    Sontfami Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Apr 17, 2012, 05:23 PM
    Kenmore washer 90 series is leaking water from underneath.
    Kenmore washer 90 series is leaking from underneath. I checked the fill hoses and they are not leaking... any ideas... I have not been able to find a manual
    drtom4444's Avatar
    drtom4444 Posts: 3,282, Reputation: 145
    Ultra Member
    		  
    #2

    Apr 17, 2012, 11:26 PM
    Look at this: http://dl.dropbox.com/u/8010163/Kenm...sher_Elite.pdf
    Also: http://dl.dropbox.com/u/8010163/Whir...%20washers.zip
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

No hot water in Kenmore 70 Series washer [ 3 Answers ]

I just replaced the hot/cold water valve in my Kenmore 70 Series Heavy Duty Plus washer model no. 82372110. I had one wire in the wiring harness, small, left over and couldn't find where to attach it. The washer fills fine with cold water but takes in no hor water. All lines and hoses are new...

Kenmore Washer (series 80) won't fill with water [ 5 Answers ]

Starts, stops, spins, and flushes out water appropriately - but won't let water in, neither hot nor cold, on any program / cycle. Any ideas? Need to fix it myself to keep housepeace...

Kenmore Elite washer leaking water [ 1 Answers ]

My kenmore Elite Washer is leaking water from back. It is not from any of the tubes ( hot, cold water and drain tube are all dry). It is from black hole on the back. It starts to leak water when it is in the washer cycle about 5-7 minutes. I have tried for small load to make sure it is not...

View more questions Search