Ask Experts Questions for FREE Help !
Ask
    arlalyles's Avatar
    arlalyles Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Apr 17, 2012, 07:10 PM
    How do I turn on a philco furnace?
    I turned off my philco furnace to set off pest control bombs and don't remember how to turn it back on.

Check out some similar questions!

I have a lennox pulse 90 furnace gsr14q3-80 furnace and when I turn the air condition [ 2 Answers ]

I have a lennox pulse furnace model no. gsr14q3-80 and when I turn the air conditioner on, the furnace hums and the outside air condition unit fan runs but the blower on the furnace will not run.

Philco furnace [ 0 Answers ]

Philco furnace runs fine during the day but at night it stops workng. What could be the cause of this?

My h/ac unit, Philco, blower does not sinc with the gas burners when on [ 0 Answers ]

I have checked, cleaned everything and was told from Philco that my mother board is bad... they said that is where the blower motor relay is and to replace the part is $300. My blower motor does not sinc with the gas burner.. comes on after the gas goes off most of the time. Any suggestions where...

I have a heil 9000 furnace I turn the furnace on and nothing happens [ 0 Answers ]

I hear a hissing noise coming from the inducer motor and the pilot does not come on what can the issue be

Furnace will not turn on [ 1 Answers ]

I have a Goodman furnace that we just replaced the vent motor on. It worked fine for about 2 hours and then it came on but would not ignite. The fan comes on and several seconds later you hear a click but the ignitor does not glow. I sucked on the line going to the pressure switch and it seems...

View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.