Ask Experts Questions for FREE Help !
Ask
    jacarter's Avatar
    jacarter Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Dec 13, 2011, 04:43 PM
    Philco furnace
    Philco furnace runs fine during the day but at night it stops workng. What could be the cause of this?

Check out some similar questions!

My h/ac unit, Philco, blower does not sinc with the gas burners when on [ 0 Answers ]

I have checked, cleaned everything and was told from Philco that my mother board is bad... they said that is where the blower motor relay is and to replace the part is $300. My blower motor does not sinc with the gas burner.. comes on after the gas goes off most of the time. Any suggestions where...

XB80 Gas Furnace , furnace fires up fan turns on but no airflow in ducts [ 2 Answers ]

Furnace fires up just fine, and fan spins but there is absolutely no airflow in duct work. Any ideas? Last spring thermostat went out and I replaced it, worked great. A month later circuit board burned out, tech found that problem and replaced it (major pocketbook ouch) and everything worked...

Tran furnace / air main blower on furnace will not run. But the a/c unit runs [ 0 Answers ]

Main blower on furnace, is not running, when thermostat calls for cooling the out side unit runs. The main blower on the furnace in not

Philco central heater only blows cold air, and will not stop blowing cold air. [ 0 Answers ]

Philco central heater only blows cold air when it should be blowing hot air. And it will not stop blowing even when I turn off the heat. The fan is not on it is on auto.

View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.