Ask Experts Questions for FREE Help !
Ask
    jack2lds's Avatar
    jack2lds Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Apr 17, 2012, 06:41 PM
    John deere l120 troubleshooting
    Mower blades will not engage when I pull the switch to engage. I have checked all wiring for wore places, seat switch, all plugins and anything else I could find. Mower is only 3 years old with 194 on the meter. Stumped.
    crigby's Avatar
    crigby Posts: 4,343, Reputation: 107
    Outdoor Power Equipment Expert
    		  
    #2

    Apr 17, 2012, 06:53 PM
    Hi,
    Check just inside the right hand frame for the wires going to the clutch. There has been some issues with the ground(usually) wire breaking.
    Peace,
    Clarke
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

John Deere L120 [ 4 Answers ]

I have a three year old John Deere L120 lawn tractor that has about 195 hours on it. I cut about 1.5-2 acres once a week, maybe a little more often in the fall to pick up leaves. Recently, the blade clutch experienced an electrical failure for which my local dealer quoted a $500-600 repair. While...

John Deere L120 Transaxle [ 12 Answers ]

Is there a way to add hydraulic fluid to a John Deere L120 riding mower? Background: it's about 5 years old. This year it is having difficulty going up hills. I thought it might be the belt, so with the unit upright, I replaced the belt. Now, it won't go at all. I believe (is this possible?)...

John deere L120 [ 2 Answers ]

Engine stalls as soon as mower deck is engaged. Any suggestions? Thanks in advance.

John Deere L120 will not go forward [ 1 Answers ]

L120 tractor runs but when pushing the forward or back pedal nothing happens

View more questions Search