Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Furnace Ducting
[ 2 Answers ]
Can anyone give me some information on hot air furnace ducting? My questions are, how far from an outside wall should your ducting be? Is there as specific insulation that needs to be used when running it along an outside wall, I live in Calgary Canada and it can get quite cold during the winter...
Oven hood ducting
[ 0 Answers ]
Does a convection oven need to be ducted to the outdoors per the 2006 Uniform Mechanical Code?
R8 ducting comparison over R4
[ 1 Answers ]
Hi: I am building a home with a closed attic system and planned R8 ducting it seem the HVAC contractor has installed R4 by mistake. I know that R4 is less expensive. I am trying to figure out how critical this will be to my efficiency. I am planning to have the HVAC contractor change out the...
What is the advantage of R8 over R4.2 ducting insulation
[ 1 Answers ]
When upgrading my furnace is the replacement of all of the ducting from R4.2 to R8, if duct size is adequate, worthwhile? Also any thoughts on the quality of 3 ton 95% Goodman furnaces? Thanks again
Ducting
[ 1 Answers ]
My old ducting is worn out and has several leaks in it and it is hard to get to. Is there a flexible type duct that I can pull threw the old duct work and make new connections at all the registers for a better air flow. View more questions Search
|