Ask Experts Questions for FREE Help !
Ask
    Searybb's Avatar
    Searybb Posts: 3, Reputation: 1
    New Member
    		  
    #1

    Apr 7, 2012, 03:03 PM
    Husky power washer
    System light is on but the motor won't come on
    ma0641's Avatar
    ma0641 Posts: 15,675, Reputation: 1012
    Uber Member
    		  
    #2

    Apr 8, 2012, 07:47 AM
    If the pressure valving has not been washed out after use it will seize and the motor will notbe able to turn the pump.
    Searybb's Avatar
    Searybb Posts: 3, Reputation: 1
    New Member
    		  
    #3

    Apr 8, 2012, 09:10 AM
    So what do I need to do now to make it work and where is that part located!!
    Searybb's Avatar
    Searybb Posts: 3, Reputation: 1
    New Member
    		  
    #4

    Apr 8, 2012, 09:18 AM
    Husky power washer
    So what do I need to do to fix this problem about the system light on but the motor won't come on so what do I need to do now and where is that part located.
    Fr_Chuck's Avatar
    Fr_Chuck Posts: 81,301, Reputation: 7692
    Expert
    		  
    #5

    Apr 8, 2012, 09:46 AM
    Please do not start new threads for the same question, I have merged the threads
    ma0641's Avatar
    ma0641 Posts: 15,675, Reputation: 1012
    Uber Member
    		  
    #6

    Apr 8, 2012, 11:08 AM
    The last one I worked on had a corroded pump body. The water inlet goes to the pump
    And the motor connects to the other side of the pump. Disconnect the motor and see if it turns and then try to start it. Try to turn the pump. If the motor turns and the pump won't, you probably needs a pump.. Husky are lower priced units and may not be worth the repair.
    crigby's Avatar
    crigby Posts: 4,343, Reputation: 107
    Outdoor Power Equipment Expert
    		  
    #7

    Apr 9, 2012, 08:27 PM
    Hi,
    All fine observations and I thought I would just link to what you did not say. Husky Power Washers are owned by The Home Depot and "folded" into the Ridgid lin(It\think) and have their own website. It is at:
    Husky Power Washer, Home Depot Pressure Washer | Pages
    Peace,
    Clarke
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Husky power washer [ 1 Answers ]

The first time I used the Turbo Nozzle W/Lance the end blew off. The only parts I could Find were the orange housing,a black round plastic defuser and the brass and rubber Nozzle. When I put it back togeather it is loose,like there is a part missing but there are Know pictures showing the...

Husky Power Washer [ 1 Answers ]

I had the same problem. I opened the handel and found the broken old O ring. I used a regular O ring from Home depot. The size is a little off, it lasts one or two times then it leaks again. Any one knows where to get the correct O rings? It is the next thing that I will try. Thanks in advance for...

Husky power washer [ 3 Answers ]

How do I use two tanks?

Husky power washer [ 1 Answers ]

What kind of oil does the pump take and how much; are there rebuild kits for this pump? Mdf

Husky Power Washer [ 1 Answers ]

Newly purchased replacement sprayer wand will not insert far enough to allow a twist and lock into place.

View more questions Search