System light is on but the motor won't come on

If the pressure valving has not been washed out after use it will seize and the motor will notbe able to turn the pump.

So what do I need to do now to make it work and where is that part located!!

So what do I need to do to fix this problem about the system light on but the motor won't come on so what do I need to do now and where is that part located.

Please do not start new threads for the same question, I have merged the threads

The last one I worked on had a corroded pump body. The water inlet goes to the pump
And the motor connects to the other side of the pump. Disconnect the motor and see if it turns and then try to start it. Try to turn the pump. If the motor turns and the pump won't, you probably needs a pump.. Husky are lower priced units and may not be worth the repair.

Hi,
All fine observations and I thought I would just link to what you did not say. Husky Power Washers are owned by The Home Depot and "folded" into the Ridgid lin(It\think) and have their own website. It is at:
Husky Power Washer, Home Depot Pressure Washer | Pages
Peace,
Clarke