Ask Experts Questions for FREE Help !
Ask
    tucsontim's Avatar
    tucsontim Posts: 1, Reputation: 1
    New Member
     
    #1

    Apr 5, 2012, 03:27 PM
    GE Z wave on/off switch
    I have installed a GE Z-wave on/off relay switch.

    There are four connections, the black load line, black hot line, white neutral line and green ground line.

    The switch is a touch pad type, not a rocker.

    When the pad is touched the lights go on and quickly go off. Almost as if the switch itself is acting as a breaker.

    I have thoroughly checked all of the connections for tightness, including the ground.

    The switch will continually activate the lights for a brief moment similar to a camera taking a flash picture.

    Thank you for considering a solution for this problem.

    Tim from Temecula

    Zw4001
    Signal frequency 908.42 MHz
    Maxium loads 600W
    tkrussell's Avatar
    tkrussell Posts: 9,659, Reputation: 725
    Uber Member
     
    #2

    Apr 8, 2012, 05:18 AM
    Is the link I provide the manual for your exact unit? If not, what is the exact model number you have?

    http://www.jascoproducts.com/support...Manual-Eng.pdf

    What is the benefit of using this type of switch? Why are you using this switch?

    Are you using it as a single pole or 3 way?
    Stratmando's Avatar
    Stratmando Posts: 11,188, Reputation: 508
    Uber Member
     
    #3

    Apr 8, 2012, 06:42 AM
    As mentioned, single pole or 3 way?
    I haven't used these, but check if there is something to change from Momentary to Maintained?

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

How wave propagate? [ 6 Answers ]

I have a very basic question about wave propagates.I would like to know how eelectro magnetic wave propagate through vacuum.why a wave moves forward?how massless photons are attraacted bby blackhole

Wave [ 2 Answers ]

how to decide In what direction is the wave traveling from the equation? A transverse harmonic wave travels on a rope according to the following expression: y(x,t) = 0.14sin(3x + 17.5t) The mass density of the rope is μ = 0.135 kg/m. x and y are measured in meters and t in seconds. +x...

Wave laws? [ 4 Answers ]

What are all of the wave laws? The law of reflection is angle of incidence=angle of reflection; and the law of refraction is Snell's Law . Are there any other major laws . Thank you.

Wave superposition [ 2 Answers ]

We are given 2 wave equations as follows: y1 = 25 sin(wt - pi/4) y2 = 15 sin(wt - pi/6) wt=omega * time Find the resultant amplitude, phase, and equation for the wave based on the superposition principle. The 2 equations above have the same frequency. Any help would be great. Thanks


View more questions Search