Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Is it safe to replacing a lighter gauge wire with a heavier gauge
[ 11 Answers ]
Hi all, One of my baseboard heater (240v)'s wire was broken can I replace it with a heavier gauge wire? Also can different gauge ground wires (copper wire) be connected with a wire-nut? IS THIS SAFE TO DO? OR Will this create a fire hazard?
I ran 6 gauge wire from my breaker then connected to 10 gauge to my hot tub
[ 1 Answers ]
I had a hot tub that ran with 10 gage wire. I bought a new one and was told Run 6 Gage from breaker to a sub panel. I was told I could use my 10 Gage Wire I already have in place. Is this true
Can I connect a 10 gauge wire to a 12 gauge wire
[ 5 Answers ]
I have 20 amp circuit with 12/3 wire and want to attach 10/3 wire to it. Can't this be done?
Connecting 14 gauge wire and 12 gauge wires in the same blue box.
[ 2 Answers ]
I am wiring my basement. All the outlets are running off 2 independent 20 amp circuit breakers connected to each other by 12/2 wire. I wanted to run some stubs off my 12/2 outlets. All each stub would do is run to a small light (max 180 watts) and of course a light switch. Since I ran out... View more questions Search
|