Ask Experts Questions for FREE Help !
Ask
    nuclear_j's Avatar
    nuclear_j Posts: 1, Reputation: 1
    New Member
     
    #1

    Mar 25, 2012, 12:29 PM
    18' PEX Dishwasher Drain Install - Requesting Tips and Tricks
    Hello there, after months of on and off searching for solutions, I think I have found the solution to my 18' Dishwasher Drain install. The DW placement is at the end of a 14' cabinet run and then the line turns/curves 45 degrees about another 4' to the sink. Most places said, "No you cannot install it that far." And some said, "You can install anywhere as long as you place the high loop or air gap close the the DW and then let gravity take care of the rest." (Thanks speedball1!)

    I also saw the suggestion to use a continuous piece of PEX. I assume that would reduce the chance of build up and therefore clogs. Does anyone have any other suggestions or is the PEX one of the best ways to go?

    I also had the idea to have another high gap next to the disposal. Would that be unnecessary, detrimental or a stroke of genious?

    One last small question, how flexible is the pex for my 45 degree turn?
    Milo Dolezal's Avatar
    Milo Dolezal Posts: 7,192, Reputation: 523
    Plumbing Expert
     
    #2

    Mar 25, 2012, 12:48 PM
    I suggest you omit Air Gap. Run loop immediately at the DW and then slope discharge towards the GD at 1/4" per foot. Since discharge from DW is pushed by pump you should not have problem with drainage. If you use rubber hose for discharge, make sure there are no kinks and hose is not flattened where you are making the 45 degree turn. Attach the hose with clamps to the back of the cabinets to assure the slope won't change. Also, for the long run, you could use rigid PVC pipe.

    Or, you can extend solid ABS / PVC drain from the sink, through the cabinet, all the way to the DW. Then, connect as usual.

    Back to you. Milo
    Attached Images
     
    speedball1's Avatar
    speedball1 Posts: 29,301, Reputation: 1939
    Eternal Plumber
     
    #3

    Mar 25, 2012, 02:48 PM
    I agree with Milo, Lose the GD loop and let gravity drain the pex.
    A second loop would trap the line. Just make sure the drain line's secured with pipe straps. Good luck, Tom

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Any tips or tricks to get my libido back? [ 9 Answers ]

I thought it would return by my second trimester, but I'm now 21 weeks pregnant and still nothing. I can't stand my partner touching me. He is being very supportive but I know he feels rejected. I have tried a few things like new undies etc but as soon as he's near me I'm turned off! I love him...

Where can I find a baseboard heater to handle an 18' x 18' room? [ 7 Answers ]

I am in the process of replacing Federal Pacific baseboard heaters and thermostats because the thermostats stick on and some of the heaters are no longer functional. They are rated 240v/16a and vary in length from 4 foot to 10 foot. Using an online calculator...

Anyone have any tips or tricks to get a flat belly! [ 4 Answers ]

Anyone got some tips or tricks on how to get a flat stomach!!

Tips, Tricks, and my .02 [ 5 Answers ]

There is a lot of great information on this site regarding relationships. There has been much ground covered and information shared. I just wanted to share some of my helpful tips to live a more fulfilling life, getting out "of the dumps," and living a joyful life. This information can be used as a...

Dishwasher Drain Install? [ 2 Answers ]

I am installing a new dishwasher in a kitchen remodel in a different location. No disposal unit on sink. Wife doesn't want big holes in her new cabinets. I have a 3-4 ft crawl space under house and could go through floor over to sinks main drain line approx. 5ft away. What would be a proper setup...


View more questions Search