Ask Experts Questions for FREE Help !
Ask
    charlesgoff's Avatar
    charlesgoff Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Mar 19, 2012, 02:06 PM
    How do you remove the spacer over the bearing/bolt on a friction wheel?
    I have a Weed Eater One and I need to replace the friction disc, the wheel the rubber drive wheel rubs on. My question is how do you remove the spacer that covers the bearing and bolt that hold the disc to the shaft. I can change everything else easy enough, if I can get the spacer off.
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
    		  
    #2

    Mar 19, 2012, 02:42 PM
    Is this your mower? If so try to give me the part numbers for the spacer. http://www.weedeaterone.com/images/W...-433203_r0.pdf
    charlesgoff's Avatar
    charlesgoff Posts: 2, Reputation: 1
    New Member
    		  
    #3

    Mar 19, 2012, 07:38 PM
    It is
    Spacer, Neutral
    Part Number: 430469
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Honda Big Red 200es Front Wheel Bearing [ 1 Answers ]

I was wondering what the part number is for the front wheel bearing on the Honda 200es three wheeler. Thanks in advance!

Wheel Bearing Job [ 4 Answers ]

Just charged me $607.00 to do the two front wheels. Mostly it was for labor. Firestone. 2003 Toyota Echo Was it a reasonable price?

Is it imperative that a new wheel bearing be used to replace the old one? [ 3 Answers ]

It is for a Honda Accord with rear brake drums. I know that with some car parts its better to buy new rather than from the auto wrecker.

Wheel bearing seized / removal inquiry [ 3 Answers ]

Hi, I removed the knuckle from my 1999 Honda Civic and passed it off to a buddy to press out the hub & wheel bearing. In doing so he did NOT remove the circlip/retainer clip and in turn chipped off 80% of the metal in front of the circlip/retainer clip. The third (3rd) picture from this...

How DO I remove the Bolt in the center of flywheel [ 2 Answers ]

I have a Craftsman Lawn tractor model #917.271651 How do I remove the center bolt on the flywheel, so I can remove the flywheel. Does it take a special puller.

View more questions Search