 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
Check out some similar questions!
Hi all, I'm having a problem with the cold water pressure in my bathtub and toilet. The hot water works great, however. There's a sink in the bathroom as well, and there's no problem there. No problems with the other two sinks/toilet on the other floors of the house. I installed a new...
My bathroom upstairs has great hot water pressure but almost no cold water at all the rest of the house is great how do I fix this and what is the difficultcy of this
The hot water pressure is fine in both showers. The cold water pressure is fine in one shower, but in the other, the amount of cold water has gradually gotten to be less and less. Now it is barely a trickle. My plumber says he would have to tear out a wall to fix it. Is there any other solution?
I have read many of the threads regarding low cold water pressure, but haven't yet found one that specifically applies to the bathroom sink. The house was built in the early 1900's, but was renovated in 2005 so it has copper pipes which cant' be much more than 2 or 3 years. The sink has separate...
I have a Mixet shower faucet (MDXTR-5). In the last several months, the cold side of the faucet has been having a very low water pressure. The hot side has a good pressure. The house is 11 years old, and I've lived there just for a year, so I don't know for sure how old the faucet is. I found...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
