Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
26HP twin "V" overhead valve Briggs and stratton nightmare!
[ 10 Answers ]
Ok, this is going to be a long post/question, but necessary for everybody to get the whole picture. I purchased 3 (non working) identical 26HP briggs engines. The idea was to get them running, and sell 2 of them, getting the 3rd one free. They are intek 446777 overhead valve engines. I...
Briggs and Stratton 18.5 crankcase floods?
[ 0 Answers ]
I have the same problem with the a similar engine (18.5 H OHV, B/S 31P777-0293E2). Starts fine, runs well for about two minutes, then gas floods into the air intake side of the carb from the crankcase breather tube; the engine sputters and dies. Can't tell which happens first, flooding or choking...
Briggs and stratton carburetor floods out spark plug
[ 10 Answers ]
I have a lincoln power arc 4000 welder generator with a Briggs and Stratton engine, the problem I am having is that it will not start? When I check the spark plug it is always wet with gas. When I spray carb cleaner in air filter it will run for a couple seconds and then die back out. I have taken...
New 26hp Briggs & Stratton Engine Surges
[ 2 Answers ]
I just replaced the engine in my lawn tractor with a new 26hp B&S v-twin vertical mounted engine. When I advance the throttle from slow to fast, the engine surges, and I am unable to get full power. There is a rod near the throttle stop that moves up and down when the engine surges. When light...
Briggs & Stratton 18.5 motor floods gas
[ 1 Answers ]
My motor is spitting gas out the carb. And floods now. View more questions Search
|