 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Briggs and Stratton 18.5 crankcase floods?
I have the same problem with the a similar engine (18.5 H OHV, B/S 31P777-0293E2). Starts fine, runs well for about two minutes, then gas floods into the air intake side of the carb from the crankcase breather tube; the engine sputters and dies. Can't tell which happens first, flooding or choking (almost simultaneous). White smoke everywhere (neighbors, wife, annoyed). Engine re-starts reluctantly, then the problem repeats, only sooner. Removed and cleaned the carb - everything looked fine. Need advice.
|
||||
Check out some similar questions!
Hello, I have a Yard Machines Riding Lawn Mower with a 16.5 HP Briggs and Stratton Single Cylinder OHV that is filling the crankcase with fuel, gasoline. This happens within an hour of mowing. I have dumped the oil twice now and it fills the crankcase within an hour of operation. It is not...
16 hp briggs and stratton engine pushing oil into crankcase breather tube. The engine is in a Cub Cadet 582 and the oil collects in the air cleaner pan. The oil level is correct. Any idea what might be wrong? Thanks in advance for your help.
I have a Toro mower with a Briggs & Stratton engine (model: 312777. Type: 0128E1), OHV 4-cycle, single-cylinder, 17 hp. I am getting lots of fuel in the crankcase. (float needle issue? ) Also, what is factory compression? I am getting about 65. Steve
I have a lincoln power arc 4000 welder generator with a Briggs and Stratton engine, the problem I am having is that it will not start? When I check the spark plug it is always wet with gas. When I spray carb cleaner in air filter it will run for a couple seconds and then die back out. I have taken...
My motor is spitting gas out the carb. And floods now.
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
