Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
What type of end cap used be used on a 1" hot water line
[ 2 Answers ]
The cap on a 1" Plastic cap on a 1" water line released when the ball valve was opened a quarter of a turn. It is my understanding that the end cap was a plastic cap that threaded on the end of the pipe. The system had been previously tested at 150 psi. Are the plastic end caps sufficient for the...
Pvc cap
[ 3 Answers ]
I have a 1" pvc cleanout cap in my line stuff at the elbow it is my kitchen cleanout line what do I do
1" pvc adapter to 5/garden hose
[ 1 Answers ]
The pump is 1" a male 1" pvc adapter screws into the pump okay. But The other end of the adapter needs a male 5/8 threaded part to screw into a garden hose . What would you call that type of fitting??
Extending a 1" PVC pipe with a male end
[ 1 Answers ]
I have to extend a 1" drain pipe so it will reach the floor but don't want to dig up my floor. I was looking for a coupler with a female end to connect the pipe and a male end so I can screwn in a sealing washer and a locknut. I looked everywhere but can't seem to find a coupler to do this. ...
Sewer end cap ejects?
[ 2 Answers ]
I just bought a house and while I was doing some yard work in the front, I noticed a partially uncovered plastic lid on a plastic pipe. It had a whole bunch of toilet paper around it but I never noticed it as it was under a large bush. At first, I didn't know what it was, so I just placed the cap... View more questions Search
|