Ask Experts Questions for FREE Help !
Ask
    stephenfevans's Avatar
    stephenfevans Posts: 1, Reputation: 1
    New Member
     
    #1

    Mar 7, 2012, 05:37 AM
    Substitute a 400W 1G 2W for a 250 Watt 1 Gang 2 Way Dimmer, safely
    Can I substitute a 400W 1G 2W Push dimmer for a 250 Watt 1 Gang 2 Way Dimmer, safely and without contravening any regulations?
    tkrussell's Avatar
    tkrussell Posts: 9,659, Reputation: 725
    Uber Member
     
    #2

    Mar 7, 2012, 08:46 AM
    Only if the actual load is less than 250watts.

    Need to check the new unit, some need to be derated, as they cannot handle full load. Usually this only is required if two dimmers are in same box.
    stanfortyman's Avatar
    stanfortyman Posts: 5,598, Reputation: 279
    Electrical & Lighting Expert
     
    #3

    Mar 7, 2012, 12:33 PM
    Quote Originally Posted by stephenfevans View Post
    Can I substitute a 400W 1G 2W Push dimmer for a 250 Watt 1 Gang 2 Way Dimmer, safely and without contravening any regulations?
    Are you in the US?

    We don't have 250w and 400w dimmers.
    Nor do we use the term "regulations" with regard to codes.
    I suspect you're in the UK or Australia.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Chandelier wiring with dimmer, when dimmer connects to dimmer that controls spots [ 8 Answers ]

Hi there, I had an electrician come and re-wire our main floor. He added spot lights everywhere. At the time we did not have a chandelier for our dinning room. Now, we have purchased it and are trying to install it, however are having a little difficulty. Here is our problem; in the dinning room we...

I have a 250 watt ceramic metal halide won't stay on [ 5 Answers ]

I have a 250 watt ceramic metal halide that uses a high pressure sodium ballast it shut off the other day and now it will re light but only for about three or four minutes then it shuts down it will fire again when it cools down what would it be bulb cap starter or ? It is all close to new any...

What happens if I plug a 120 watt appliance into a 220 watt socket? [ 4 Answers ]

What happens if I plug a 120 watt appliance into a 220 watt socket?

Capacity of dimmer switches and how many can go in a 3 gang box? [ 6 Answers ]

I am lighting my basement with a good number of canned lights. I'm trying to determine how many lights can be put on one dimmer and how many dimmers can go in a 3 gang box. If I have read correctly I can get up to 1000 watt dimmers and I should only load that up to 80%. I have no idea how many...


View more questions Search