Ask Experts Questions for FREE Help !
Ask
    fannindc's Avatar
    fannindc Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Mar 4, 2012, 03:39 PM
    Need to replace shower drain strainer body but can't find any with matching threads.
    Pvc astm d2665
    massplumber2008's Avatar
    massplumber2008 Posts: 12,832, Reputation: 1212
    Senior Plumbing Expert
    		  
    #2

    Mar 4, 2012, 06:58 PM
    Hi Fannindc

    I'm afraid that number isn't helping much... ;)

    I can tell you that there should be a few options available to you here.

    At a minimum, you should be able to replace any PVC shower strainer assembly using the WING-TITE shower strainer... see image. This is a "universal fit" shower strainer that actually allows for installation from ABOVE the floor so there is not necessarily a need for access to the drain/ptrap from below!

    Check it out at WingTite Shower Drain- Replace the Drain, Not the Whole Shower

    Another alternative would be to remove your assembly and take it over to a plumbing supply house. They should be able to transition over to almost anything!

    Back to you...

    Mark
    Attached Images
     
    Chazdrums's Avatar
    Chazdrums Posts: 1, Reputation: 1
    New Member
    		  
    #3

    Mar 5, 2012, 10:02 AM
    Try Plastic Oddities 800-438-5327, Check-out model PFG600 course thread 3" over threads (Talk to Nicole)

    Charlie R
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Caulk needed around top or bottom edge of shower drain strainer? [ 5 Answers ]

My shower drain strainer was cheap plastic and it broke, so I'm replacing it with an Oatey 4.25" metal strainer. It is the snap-in type with the ears that extend out from the four small tabs, shown on the bottom of this page: http://www.plumbingsupply.com/wing-tite-shower-drain.html I don't...

Trying to replace shower head but when I took old one off it has no threads [ 2 Answers ]

My old shower arm has no threads on it when I took old shower head off I think it was glued on... so do I replace old shower arm if so how is it done?

How to remove shower drain strainer? [ 1 Answers ]

Hello, I've been having some trouble lately with a persistent drain odor coming from the shower drain in our master bathroom. I've been trying to remove the drain strainer so I can access and clean out the vertical drain pipe/ tailpiece, but I haven't had much luck. Since there are no screws for...

Shower Strainer - where to find [ 2 Answers ]

First time poster. Looking for a strong (brass?) shower strainer replacement. Original is 3-1/2" diameter with 2 screws 2-3/4" apart on center. Chrome finish. Bought a replacement at Orchard Supply Hardware - but the strainer dented the first time I stepped on it. Don't know the...

Replacement shower drain strainer [ 6 Answers ]

Our tiled in shower in the basement has a very rusty drain strainer (and rusty drain underneath it). I've looked for a replacement strainer, but none of them comes large enough to fit. The old strainer is 5 7/8 " in diameter. It has OLYMPIC stamped on it. Can I find a replacement? If not, do...

View more questions Search