Ask Experts Questions for FREE Help !
Ask
    rudyfanlight's Avatar
    rudyfanlight Posts: 4, Reputation: 1
    New Member
    		  
    #1

    Jan 29, 2012, 12:06 PM
    Fan light switch problems
    I have a remote ceiling fan switch that doesn't allow the fixture to turn off completely . When I initiate the bottom turn off switch it will go completely out, but that is the only means of turning off the fan light
    paraclete's Avatar
    paraclete Posts: 2,706, Reputation: 173
    Ultra Member
    		  
    #2

    Feb 28, 2012, 04:24 PM
    Try reposting this to electrical or home maintenance
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
    		  
    #3

    Feb 28, 2012, 04:54 PM
    Yes, we are trying to move this question to the correct topic. In the meantime Rudy brand and model may help us help you. Also if you don't mind try rewriting this line "When I initiate the bottom turn off switch it will go completely out, but that is the only means of turning off the fan light
    "
    hkstroud's Avatar
    hkstroud Posts: 11,929, Reputation: 899
    Home Improvement & Construction Expert
    		  
    #4

    Feb 29, 2012, 06:39 AM
    When I initiate the bottom turn off switch it will go completely out, but that is the only means of turning off the fan light
    I am assuming that the bottom turn off button turns off everything and that you are trying to turn off the light with the dimmer button. Check instructions for the remote. Probably need to press the light button twice.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Need help changing a two wire light switch to a fan and light switch. [ 3 Answers ]

Wall switch box has two black wires and two white wires(spliced. New switch has black wire, red wire(light),yellow wire(fan), and green wire(ground). I think I need an independent wire for the fan and light. How?

Separate Fan light switch, fan switch and switch for can lights to one location [ 2 Answers ]

I have A circuit that has 6 can lights and a fan light. The power is at the switch box I need to know how to wire the separate switches for the cans,and the light on the fan, and fan (That would be in a three gang switch box.) to one location.

Wiring hunter fan and light /light to 3 way and fan to on off wall switch [ 4 Answers ]

I now have both fan and light connected to a three way switch. It works fine. I would like to keep the three way with light, and use the fan on another on/off single switch. A three way duplex would do this. The question is, will I have to run another 12/2 line to the fan And can I use the other...

Replaced ceiling fan light switch - problems [ 1 Answers ]

Hello. I have a ceiling fan with 2 pull chains (fan, light). It also operates via remote control. The wall switch is just on & off. In a perfect world, when it was first installed, the remote would make the lights brighter & dimmer. The remote would also do 4 different fan speeds. At some point,...

Installing a light kit on a ceiling fan where a switch enables both fan and light [ 2 Answers ]

I have a Hampton Bay ceiling fan with three wires emerging from the top: white, black, red, and green. Presently the white, black, and green are hooked up to a switch and the fan works fine. The red is capped. The fan also has a chain which I intend on keeping on the medium setting indefinitely. ...

View more questions Search