Ask Experts Questions for FREE Help !
Ask
    Ike76's Avatar
    Ike76 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Feb 26, 2012, 06:13 PM
    Kenmore 110.24832200 washer agitator not spinning, making
    The agitator motor is making a grinding noise. Maybe the gear shaft is not engaging the center agitator? Could the gears be stripped? The washer is about 9 years old, but has been moved around in storage for the last three years. It worked fine when we put it away. I was a little rough on it, when moving it all by myself without a dolly. The water fills and the water gets pumped out, but the agitator or spin cycle will not work. Is there an easy fix? Thank you in advance. Oh yeah, there appears to be slight amount of oil on the bottom surface of the gear case.
    donrons's Avatar
    donrons Posts: 3, Reputation: 1
    New Member
    		  
    #2

    Feb 26, 2012, 07:07 PM
    No easy fix cheaper to buy a new or used one about time u pay for parts n labor
    parttime's Avatar
    parttime Posts: 1,440, Reputation: 113
    Ultra Member
    		  
    #3

    Feb 27, 2012, 04:58 AM
    Hi ike, I have to disagree with don, It's a lot cheaper to repair than replace most always. That said, have you checked the drive coupling

    Kenmore 110.24832200 Parts List

    You can see one here. Good luck
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

My kenmore washer model number 110.24422300 is not spinning on the spin cycle [ 0 Answers ]

My kenmore washer model number 110.24422300 is not spinning on the spin cycle. The water is draining but it is not spinning. It spins sometimes, but other times I spin it with my hand to get it started. Sometimes it works and sometimes it doesn't. It is making the noise like it is spinning, but...

Kenmore washer 110.26842694 agitates, stopped draining & spinning on some, then all. [ 0 Answers ]

My Kenmore washer, model #110.26842694 was filling and agitating just fine, but only draining on some cycles, then it stopped draining and spinning altogether. Thanks,

Kenmore Washer Elite Model #110.22952102 Making High Pitch noise during drain. [ 1 Answers ]

I have a Kenmore Elite model #110.22952102. It just started making an awful high pitched noise during the first drain. I'm afraid to finish the cycle.:( Can anyone help me please! Thank you, Tammy

Kenmore Wash 110.24832200 not agitating properly [ 1 Answers ]

My Kenmore washer model # 110.2483220 is not agitating properly. It is still agitating but not like it should. When I press down on the agitator it works again, when I lift it, it skips. Can you tell what is wrong and how to fix it? Thanks Michelle

Kenmore Washer, Model No. 110.24832200, Stopped Spinning and won't drain [ 1 Answers ]

I have a Kenmore 80 Series, Model No. 110.24832200 washing machine. It goes through the cycles fine, but when it comes to spinning and drainig the water, it won't function properly.

View more questions Search