[CGJamma]

How do you remove the center portion of the flange after you have mounted onto the floor

[massplumber2008]

Hi CGJamma

Are you asking how to remove the "knock out" plug in the center of the flange?

If so, you hit the raised ridge with a hammer and that starts to break the seal. Continue hitting the raised ridge until the cap is slightly loosened and then use a pair of pliers to wiggle the plug back and forth to remove it, OK?

You could also use a dremel tool with circular saw blade and cut it out if the hammer method worries you.

Back to you...

Mark

[ma0641]

Had me wondering how you flushed through a 3/4" flange!! 3 or 4" flange. Mark gave you good directions, I'd do the same.