 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Fluorescent?
I wired up a new Lithonia 4 buld fluorescent 54w high output fixture and I have a black white and green wires from my box. And the light fixture has a black, white and red wires, I know the ground green screws to the bottom of the fixture white to white but I am confused to where the black to black or red to black or wire all 3 together please help
|
||||
|
||||
|
Please provide the part number of the ballast inside the fixture.
On that label of the ballast you should also find a wiring diagram. Could be the black wire is for 120 vol input, and the red wire is for a different input voltage. New fixture should come with instructions and a wiring diagram. |
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
My Fluorescent sign just went. I've 2 signs tied in together some how with a total of 4 ballast. One of the signs has been out for awhile and I've been running only one of them. The 1st thing I did was replace 2 tubes and that didn't work. There is power coming in. What could it be ?
How many fluorescent light fixtures will I need for a new rec room 12 1/2 x 18? Ceiling height is 85 1/2".
How to check a ballast for a fixture with 2- 8 foot lamps
I installed a Hampton Bay Outdoor Wall-mounted lamp with motion-sensor. The installation comes with a 100 watt incandescent lamp. The fixture works as described. I replaced the incandescent lamp with a 23 watt spiral fluorescent lamp (100 watt incand. eq.). It works as described except when it...
I've heard that dimmer switches should not be used with fluorescent lights (kitchen). True or not? I haven't found anything in the books that I have. Are there dimmer switches made just for fluorescents? Thanks for the help. Jersey
View more questions Search
|
