Fluorescent Light

frank fuge Posts: 1, Reputation: 1

New Member

Dec 1, 2008, 06:50 PM

Fluorescent Light

How to check a ballast for a fixture with 2- 8 foot lamps

stanfortyman Posts: 5,598, Reputation: 279

Electrical & Lighting Expert

Dec 1, 2008, 06:53 PM

Be more specific, I have no idea what you are asking.

Add your answer here.

Check out some similar questions!

Fluorescent light and humidity [ 4 Answers ]

My kitchen ceiling light is known to not work during periods of high humidity. Last year I replaced the sockets that the (2) bulbs get twisted into, and the problem seemed solved. However, during a recent about of high humidity, the two bulbs weren't working once again. Once the humidity...

Fluorescent light will not light on ceiling fan [ 1 Answers ]

I have a model #357630 Renaissance Hampton Bay ceiling fan. For a good 6 months the light would come on all by it's self. Today, I took the canopy down and found that the receiver was burned and melted a little. First I tried to wire it without a receiver, I could get the fan to work but not the...

Fluorescent light fixture [ 4 Answers ]

I have a problem my friend has a fluorescent light fixture when he turn on the lights they stay bright for a while and then they go dim. This is what I did so far I change the Ballast light clips and the blubs but I am still having the same problem. Is there anything I might be over looking ...

New Fluorescent Light bulbs and their use [ 9 Answers ]

I’m sure this has been asked … but I am looking at these 13Watt replacement bulbs that are 60 Watt replacements. Now, I have light fixtures in my house, which are all labeled with Use 60 Watt Maximum. Can I use a higher Fluorescent (and hence get more Light Output) into some of my darker...