Ask Experts Questions for FREE Help !
Ask
    rondemanna's Avatar
    rondemanna Posts: 1, Reputation: 1
    New Member
     
    #1

    Feb 18, 2012, 10:23 AM
    Fan motor heats up then freezes
    Why does the motor heat up then cease
    wmproop's Avatar
    wmproop Posts: 3,749, Reputation: 91
    Ultra Member
     
    #2

    Feb 18, 2012, 07:58 PM
    Bad bearings,, all you can do is replace motor
    baileeboy's Avatar
    baileeboy Posts: 8, Reputation: 1
    New Member
     
    #3

    Feb 19, 2012, 03:07 AM
    Your unit may have a maintanence problem or may need new parts to help solve the problem also another reason this may of occurred is because of the units cooling fan not working properly, I suggest you get a expert to come and fix it.

    Hope it helps.

    B.Mason

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Not heating in auto but heats when fan is on posiiton Rheem 80 Plus [ 0 Answers ]

Heater does not start unless the blower is in the on position. Before it was intermittent but not it does not come on unless the blower fan is on. Then the heater ignites.

Gibson blower motor not running. Unit outside freezes up.what's wrong? Relay Switch? [ 0 Answers ]

We have a Gibson central air and heat pump. Blower quits and unit outside freezes up. If we turn it off for a while everything works okay for a little while. Is the relay switch in the blower motor bad? If so where is it located?

My trane unit only heats when the fan is on all the time [ 0 Answers ]

I have a trane 2/4 TEE3F65 with a TCONT802 Themostat. The unit will heat but only when the fan is running all the time. In the auto mode the stat calls for heat but the fan does not kick on, so I am not sure if the heat is running with no fan or nothing is running. Either way the Fan has to be...


View more questions Search