Ask Experts Questions for FREE Help !
Ask
    gmrs25's Avatar
    gmrs25 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Feb 11, 2012, 06:11 PM
    Unicell oil furnace fan
    When the thurmostat calls for heat the oil burner turns on but the big fan does not
    The fan does work if the tstat is set for fan on but not in auto maybe a relay?

Check out some similar questions!

Should I run fan of oil furnace all the time? [ 3 Answers ]

I have a forced air oil furnace heating and cooling system. I was told to run the fan on the furnace continuously. Is this correct or should it be only in the warm weather? jwj3546

Unicell furnace fan comes on burner does not [ 0 Answers ]

Replaced thermostat with programmable thermostat, only four wires, yellow white black red.

My oil furnace is continuing to fire even after the blower fan shuts down [ 4 Answers ]

When I turn my thermostat on, my oil-fired burner turns on, and the blower fan keeps cycling on and off. On for 5 minutes, off for about 30 seconds, on for another five minutes and so on. Meanwhile, because the building thermostat temperature still hasn't been reached, the furnace remains on, even...

Oil Furnace.Burner goes out before fan comes on [ 3 Answers ]

Hello, I have a Miller oil furnace Model MSBA-066ABFO-05 that fires up and then shuts down because the fan takes to long to turn on. When this happens the reset trips on the controlor. The fan comes on shortly after the limit trips. When the fan is running if I push the reset the burner fires...

View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.